The characteristics of description:

Cantilever racking is suitable for storing long or circular material, flat products, tubes and irregular goods. Cantilever rack column using h-beam or cold rolled steel, cantilever with square tube, cantilever racking using cold rolled steel or h-beam, cantilever and the pillar type, bolts or plug type connection between the base and pillar between the bolt connection type, base with cold rolled steel or h-beam. The goods access by forklift, driving, or artificial. Shelves within 2.5 meters in height often (such as by forklift access can be as high as 6 meters), the cantilever length is in 1.5 meters of less than, each arm load usually within 1000 kg. This kind of shelves used in mechanical manufacturing industry and building materials supermarkets. Added after the racks, especially suitable for the space is little, low height of warehouse, convenient management, wide vision, compared with ordinary plate racks, utilization rate is higher; According to the bearing capacity can be divided into lightweight, medium volume type, weight type 3 kinds.

Deposit for heavy, scattered or other special products, cantilever racking is the ideal solution. Cantilever racking include single arm model and double, effective storage timber, tubes, strip and other similar products. Cantilever racking is the traditional pillar installed on the bracket and become, is a kind of long special shelves.

Cantilever storage system of several major features:

1, applies only to strip or long goods store.

2, need the handling equipment of the fork is apart from the wide such as fork from the side of the big forklift.

3, shelf highly restricted, generally below 6 m.

4, space utilization rate is low, about 35% - 50%.

5, storage type: strip and long.