Shelves use and maintenance of the matters needing attention.

For shelf everyone may be very familiar with, is often used in the warehouse storage, storage and custody of the goods. In the development of modern logistics, shelf also played a very important role, is applied to a variety of industries, including electric power, machinery, automobile, chemical, pharmaceutical, etc. So, in normal we use in the process of storage shelves, how to do maintenance and follow some rules? May be some people think it is made of steel structure, strong don't need to do too much maintenance, but the longer duration of use and daily non-standard operation damage, don't pay attention to the maintenance will cause serious influence for later use. Kay rand shelf below small make up take you together and see it!

Shelves should first pay attention to safety problems in common use, which requires the daily inspection. For damage occurred during operation, to timely replacement or repair the component, and consider on the basis of existing protective measures in a timely manner to take appropriate remedial measures. In use after a certain period, still need to do maintenance of a whole, such as some place small wear, paint, or bent parts, rack structure tilting, problems should be handled in a timely manner.

In use, of course, as long as we abide by some practice, so there would be little probability of the above problems, the concrete can refer to the following aspects:

1, prevent overload: each shelves in the design of the production has good bearing, the choice of material also is closely related with the bearing of the shelves, if don't consider when using bearing, blind stacking goods, may occur safe hidden trouble, may cause safety accidents.

2, super high and super wide: shelves of the height and width are certain numerical limitation, some manufacturer in order to increase the storage capacity of the shelves, may be to transform, to extend the height and width, and the result is in use by certain restrictions, and there will be a potential safety hazard.

3, to prevent the impact: in the process of warehouse operation staff to work in normal, may sometimes accidentally let the forklift hit the shelves, in order to avoid this problem, should be careful when employees in the job; Also for shelf manufacturer to these considerations, in the beginning of the design solution to this problem, such as increasing the anti-collision ability, etc.

4, well protected against dampness moisture: although shelves do the surface treatment, but also should pay attention to in the process of using moistureproof, if need to use after found be affected with damp be affected with damp cloth wipe up, avoid rust. Also need special attention shelves interface position, it is relatively easy to rust. , after the discovery of the shelf rust pickling paste can be used for maintenance, there would not be in specific, you can view the articles: dense storage shelves derusting small tips!

5, operation specification: to observe the top shelf to put light, the underlying put heavy principle, specification of goods put.