The classification of nanchang specialized customized stereoscopic warehouse

According to the shelf height classification

And can be different according to the height of shelf, can also be subdivided into high-rise warehouse (15 meters), middle, stereoscopic warehouse (5 ~ 15 meters) and lower stereoscopic warehouse (5 meters), etc.

Because of the high-rise warehouse cost is too high, special, and installation of machinery and equipment required is difficult, and therefore relatively less construction; Low-level stereoscopic warehouse is mainly used in the old library transformation, is to improve the old library technical level and capacity of the way; Now more middle stereoscopic warehouse.

According to the shelf structure classification

1) unit warehouse goods format

Nanchang specialized customized stereoscopic warehouse unit goods format stereoscopic warehouse is a standard format of general three-dimensional warehouse, its characteristic is each layer shelf is composed of goods of the same size, the passage between the case openings for goods shelves, under the drive of the channel and pickup machinery to put the shelves on both sides of the left, right, take operations. Each goods store a cargo unit or combination of units.

Shelf is a group with two rows, between groups with channel. So the warehouse needs to have more channels, the area utilization rate is not too high (about 60%), high space utilization.

Unit format stereoscopic warehouse. The available to operate a variety of lifting handling machinery. In general, medium and high mainly USES the rails along the roadway crane, in order to make sure to operate within a narrow roadway, the lower and middle three-dimensional stereoscopic warehouse warehouse height lower, also with general forklift or elevated forklift operation, to reduce the forklift truck turning the channel width, forklift truck not to operate from the front, and take the side of the fork forklift operation.